Aersync Smart Dust Extractor Controller automatically activates your dust extractor as soon as your cutting tool is in use, providing a cleaner, safer, and more efficient workspace.

No, setting up Aersync is easy—just follow three simple steps:

1️⃣ Plug your cutting tool into the “Tool” socket.
2️⃣ Plug your dust extractor into the “Motor” socket.
3️⃣ Start your tool, and Aersync will automatically activate the dust extractor, keeping it running for your preset time after you stop.

That’s it—effortless dust control in seconds!

The controller is compatible with any tool, such as cutting, sanding, and planing tools, as long as they operate with standard 10A power sockets.

Yes, we offer a 15A version as a special order. Please let us know when placing your order, as this model is built to order. Additionally, we have a 3-phase adapter available for controlling 3-phase dust extractors.

Yes, with the optional Smart Wireless Sensor, you can connect multiple tools throughout your workshop to a single dust extractor. 

Yes, you can use the test button on the control panel for quick operation. Alternatively, you can easily control the dust extractor with the remote, allowing you to turn it on or off manually. The remote also lets you set specific run times, such as 10 minutes or 8 hours.

Ensure all sockets and plugs are securely connected.

Check that the power supply is active.

Verify that the tool and dust extractor are compatible with the system.

Power cycle the controller.

If the problem persists, refer to the troubleshooting section in the user manual or contact Aerguard support.

Ensure the system is powered off before connecting or disconnecting any tools.

Use only supplied power cable.

Do not exceed the power limits specified on the nameplate.

Keep the controller away from moisture and extreme heat.

Contact our support team via phone or email, as listed in the user manual. Alternatively, visit the support section on our website for troubleshooting tips and FAQs