Description

ToolSense is a wireless tool sensor for automatic dust extraction. It detects when a connected woodworking tool runs and sends a start signal to Aersync P1 with an Aerswitch Mini receiver, or to the built-in receiver in Aerswitch P3. Use sensors at separate workstations to start a shared extractor. See multi-machine dust extraction setups.

How to set it up

  1. Plug your compatible tool into ToolSense.
  2. Plug ToolSense into the correctly rated power outlet.
  3. Put the compatible receiver into pairing mode: use the external Aerswitch receiver with Aersync P1, or the built-in receiver on Aerswitch P3.
  4. Press Test on ToolSense, then confirm that the extractor responds as intended.

Important compatibility notice

Aersync P1 controllers purchased before September 2026 require a firmware update for ToolSense compatibility. The firmware update and testing are free. You pay inward postage; Aerguard covers return postage within Australia. Contact us before ordering if you have an older P1.

Workshop setup

Multiple compatible ToolSense sensors can be used at separate workstations with a supported controller, using its compatible external or built-in receiver. Check compatibility and pairing capacity before ordering. Wireless range is up to approximately 30 metres in suitable conditions; large metal equipment and walls can reduce reception.

ToolSense requires a compatible controller. An external Aerswitch receiver is required for Aersync P1, but not for Aerswitch P3, which has a built-in receiver. ToolSense does not replace machine safety controls. Use the rating appropriate for your tool and outlet. Do not adapt a 15A model to a 10A outlet.

Product Support | Contact Aerguard

Additional information

Current Rating

10A, 15A

Customer Reviews

No reviews yet.

Be the first to review “ToolSense – Wireless Automatic Dust Extractor Sensor”

Your email address will not be published. Required fields are marked *

Are you human? Please solve:Captcha