Free Shipping Bar Attributes
Single-Phase Dust Extraction Setups
For workshops using standard 230–240V power
Aerguard offers dust extractor controllers to suit a range of workshop setups, from one tool and one extractor to multiple workstations with wireless control. Explore the examples below to find a dust control solution that fits the way you work.
Looking for 3-Phase?
One Dust Extractor, One Tool
The mitre saw and dust extractor connect to an Aersync P1 automatic dust extractor controller.
Start the saw and dust extraction starts automatically, then continues for your chosen run-on time after the saw stops
Products Needed: Aersync P1
One Dust Extractor, Remote Control
The dust extractor connects to an Aersync P1 fitted with an Aerswitch Mini receiver for wireless remote control.
Switch extraction on and off from your workstation with the remote, without walking over to the dust extractor.
Products Needed: Aersync P1 + Aerswitch Mini + Remote Control (2 units)
One Dust Extractor, Wireless Tool Activation
A ToolSense unit at the workstation wirelessly starts one dust extractor through an Aersync P1 fitted with an Aerswitch Mini receiver, even when the tool is positioned farther away from the extractor.
Start the connected tool and dust extraction starts automatically, without walking across the workshop to switch the extractor on and off.
Products Needed: Aersync P1 + Aerswitch Mini + ToolSense
One Dust Extractor, Multiple Wireless Tools
ToolSense units at multiple workstations wirelessly start one shared dust extractor through an Aersync P1 fitted with an Aerswitch Mini receiver, even when the tools are positioned farther away from the extractor.
Start any connected tool and dust extraction starts automatically, without walking across the workshop to switch the extractor on and off.
Products Needed: Aersync P1 + Aerswitch Mini + ToolSense 3x
Two Extractors, Two Direct Tools, One Wireless Tool
The table saw and mitre saw each connect to an Aersync P1 controller that automatically starts their respective dust extractors. The planer farther away uses ToolSense to wirelessly start the extractor it shares with the mitre saw through an Aerswitch Mini receiver.
All three tools trigger dust extraction automatically when started, and extraction stops after the set run-on time once the tool stops—no remote button presses or manual switching required.
Products Needed: Aersync P1 (2 units) + Aerswitch Mini + ToolSense
