Free Shipping Bar Attributes
-
Out of stock
AerLock Control Panel Key – Aersync P1
$26.00Keep your Aersync P1 settings protected from unwanted adjustments. 🔹 Plug In to Adjust – Insert AerLock to enable the rotary knob and yellow control buttons. 🔹 Remove to Restrict – Remove the key when you want the control settings left unchanged. 🔹 Ideal for Shared Workshops – Useful for Men’s Sheds, training spaces and workplaces with multiple operators. 🔹 AerLock-Equipped P1 Required – Not compatible with an unmodified standard Aersync P1. Key only: Aersync P1 controller is not included. AerLock is not an electrical safety isolation device. -
Aerswitch P3 + ToolSense Three-Phase Automation Bundle
Price range: $436.05 through $824.60Save 5% when bought together — bundle price applied automatically, no coupon needed.
One Aerswitch P3 three-phase extractor controller, selected remote and 1–4 single-phase ToolSense sensors. Choose the ToolSense rating to suit your tools and outlets.
-
Aersync P1 + AerLock Shared Workshop Control Kit
Price range: $251.75 through $270.75Automatic dust extraction with protected control settings for shared workshops. 🔹 10A or 15A Controller – Select the Aersync P1 rating to suit your workshop's connected load and outlet. 🔹 AerLock Key Included – Plug in the key to adjust the rotary knob and yellow buttons; remove it to restrict adjustments. 🔹 Automatic Tool Activation – Aersync P1 automatically starts the extractor when a directly connected tool runs. 🔹 Ideal for Shared Workshops – Useful in Men’s Sheds, training spaces and workshops with multiple operators. 🔹 2-Year Warranty & Local Support – Australian-based support and warranty against manufacturing defects. Controller and key only. AerLock is not an electrical safety isolation device. -
Two-Extractor, Three-Tool Automation Kit
Price range: $633.65 through $731.50ToolSense compatibility: Aersync P1 controllers purchased before September 2026 need a firmware upgrade. Contact Aerguard before ordering if using an older P1.
This kit includes a new, compatible Aersync P1. The firmware warning applies only to pre-existing older P1 controllers, not the new controller supplied in this kit.
Automate two extractors across three tools, with electrical ratings tailored to your workshop.
🔹 Two Aersync P1 Controllers – Select 10A or 15A independently for each extractor setup.
🔹 Wireless Controls Included – Aerswitch Mini receiver + 4-button remote.
🔹 One Wireless ToolSense – Choose 10A or 15A for the third workstation.
🔹 Optional AerLock – Add an AerLock-equipped control panel and removable key to Controller 1 (+$26), Controller 2 (+$26), or both (+$52).
🔹 Customise the Setup – The image shows an example; change each rating and select your AerLock option below; the price updates automatically.
🔹 2-Year Warranty & Local Support – Australian-based support.
Controls only: Tools, extractors, hoses, ducting and blast gates are not included.
-
Two-Station Remote Dust Extraction Kit
Price range: $309.70 through $335.35Control one shared dust extractor from two workshop stations with your choice of simple or timer-equipped remotes. 🔹 Complete Wireless Controls – Includes your chosen 10A or 15A Aersync P1, Aerswitch Mini receiver + your chosen remote type, and a second matching remote (2 remotes total). 🔹 Choose Your Controller – Select 10A or 15A to suit your connected load and outlet. 🔹 Customise the Illustrated Setup – The image shows an example; change the controller and remote options below. 🔹 Choose 2-Button ON/OFF – Simple instant ON and OFF control from either workstation. 🔹 Or Choose 4-Button + Timers – ON/OFF plus 10-minute timed operation and 8-hour mode on both remotes. 🔹 Manual Remote Control – Operates the extractor remotely; does not automatically sense when a remote tool starts. 🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support. Controls only: Tools, dust extractor, hoses, ducting and blast gates are not included. -
Wireless Dust Extraction Starter Kit – 1 to 4 Tools
Price range: $406.60 through $809.40ToolSense compatibility: Aersync P1 controllers purchased before September 2026 need a firmware upgrade. Contact Aerguard before ordering if using an older P1.
This kit includes a new, compatible Aersync P1. The firmware warning applies only to pre-existing older P1 controllers, not the new controller supplied in this kit.
Start your tool and let your dust extractor start automatically—even from another workstation.
🔹 Complete Wireless Controls – Includes Aersync P1, an Aerswitch Mini receiver, your chosen number of ToolSense sensors and one four-button remote.
🔹 Customise the Illustrated Setup – The image shows an example; choose your controller rating, ToolSense rating and quantity below.
🔹 Start with One Tool – Choose one ToolSense for a single wireless workstation, or add sensors for more tools.
🔹 Automatic and Remote Control – ToolSense detects your tool starting; the included remote gives you manual ON/OFF and timer control.
🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support.
Controls only: Tools, dust extractors, hoses, ducting and blast gates are not included.
-
Aersync P1 Automatic Controller – Single Phase
Price range: $239.00 through $291.00Aersync P1 by Aerguard is an automatic vacuum switch and dust extractor controller for single-phase woodworking tools. Start your tool and the extractor starts automatically. When the tool stops, the extractor runs for the time set on the dial, then switches off.
Which Aersync P1 model?
Add your tool and dust extractor wattages.10A: Up to approx. 2400W15A: Up to approx. 3600W. Requires a 15A outlet.Example: 1650W saw + 750W extractor = 2400W total. This is at the approximate 10A limit.Check the combined nameplate current and motor starting requirements; wattage alone is a guide.✅ Flexible payment options available at checkout.
🔹 10A or 15A Options – Choose the version that suits the combined load of your tool and dust extractor. The 10A model has a removable power lead; the 15A model has a fixed heavy-duty lead.
🔹 Automatic Start and Stop – Start your tool and your dust extractor switches on. When your tool stops, the extractor keeps running for the time set on the rotary knob, then switches off.
🔹 Simple Plug-In Setup – Plug your tool and dust extractor into Aersync, then connect Aersync to a suitable power outlet.
🔹 Easy Timer Adjustment – Turn the rotary knob to choose how long the extractor runs after your tool stops—from 5 seconds to 8 hours.
🔹 Easy-to-Read Display – Shows the operating status, time remaining before shut-off and any fault alerts.
🔹 Quick Operation Check – Press the Test button on Aersync P1 to check that it turns on your extractor—no tool or remote needed.
🔹 Optional 1-Second Start Delay – Press the delay button to have your extractor start 1 second after your tool, helping reduce circuit-breaker trips.
🔹 Strong Metal Housing – A durable metal enclosure built for workshop use.
🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support when you need help.
Optional Accessories
ToolSense — Detects when a compatible tool is running and sends a wireless signal to the Aerswitch receiver to activate Aersync P1.
Aerswitch Mini Receiver Kit — Adds wireless remote control to Aersync P1.
- 2-Button Remote: ON/OFF control.
- 4-Button Remote: ON/OFF plus 10-minute and 8-hour modes.
Designed and assembled in Australia.
-
Aerswitch P3 Remote Controller – Three Phase
Price range: $339.00 through $344.00Start and stop your three-phase dust extractor from your machine. Keep the remote at your saw, planer or workbench—no walk back to the extractor each time.
$339 with the recommended two-button remote, or $344 with the four-button remote. Includes the controller and selected remote.
- Built-in receiver—no Aerswitch Mini required.
- Two-button remote: ON/OFF control.
- Four-button remote: ON/OFF plus 10-minute and 8-hour timer modes.
- Display and Test button for status and operation checks.
- Designed and assembled in Australia, with local support and a two-year warranty covering manufacturing defects.
Suits a 4-pin supply plug on your dust extractor as standard. A 5-pin option is available. Check your dust extractor’s supply plug before ordering. See connection options below.
-
Aerswitch Mini Receiver & Remote Kit – For Aersync P1
Price range: $65.00 through $69.00Add wireless control to Aersync P1. Includes an Aerswitch Mini receiver and your choice of remote.Easy setup: Plug the receiver into Aersync P1. The included remote is pre-paired.2-button remote: ON starts the selected timer cycle; OFF stops extraction.4-button remote: Adds 10-minute and 8-hour operating modes.ToolSense ready: Receives wireless signals from compatible ToolSense sensors at other workstations.Compatibility: Requires Aersync P1, sold separately. Aerswitch P3 has a built-in receiver and does not need this kit.ToolSense sensors are sold separately.2-year warranty and Australian-based support. -
M12 Y Splitter – Connect Aersync P1 & Aerswitch P3
$19.00M12 4-Pin Y Splitter – 1 Male to 2 Female
Easily connect both a PE sensor and controller to your 3-phase dust extraction system using this durable M12 4-pin Y splitter.
-
Supports PE sensor + controller connection
-
Plug-and-play with standard M12 connectors
-
Refer to System Types for connection examples and setup guidance
-
-
Remote Control 2 Button
$22.002-Button Remote
Add another wireless remote to a compatible Aerguard controller.
Receiver needed? Aersync P1 needs the external Aerswitch Mini receiver. Aerswitch P3 already has a built-in receiver, so it does not need the Mini.
This is an additional remote, not a complete controller or receiver kit. Pair the remote with your system before using it.
ON/OFF for compatible controllers.
-
Remote Control 4 Button
$25.004-Button Remote
Add another wireless remote to a compatible Aerguard controller.
Receiver needed? Aersync P1 needs the external Aerswitch Mini receiver. Aerswitch P3 already has a built-in receiver, so it does not need the Mini.
This is an additional remote, not a complete controller or receiver kit. Pair the remote with your system before using it.
ON/OFF, 10-minute and 8-hour modes for compatible controllers.
-
Out of stock
Aerswitch P1 Remote Controller – Single Phase (Launch December 2026)
COMING SOON — Aerswitch P1 Single-Phase Remote ControllerSwitch a compatible single-phase dust extractor ON or OFF from your workstation using a wireless remote.Remote control: This is a remote-operated controller, not an automatic tool-current detection system.Available remote functions: 2-button ON/OFF, or 4-button ON/OFF with 10-minute and 8-hour modes (subject to final release specifications).Not available to order yet. Register below for launch updates. No obligation to purchase.Register Your Interest — Aerswitch P1
[fluentform id="6"] -
Out of stock
Aersync P3 Automatic Controller – Three Phase (Coming Soon)
Price range: $365.00 through $391.00COMING SOON — Aersync P3 Automatic Three-Phase ControllerDesigned to start a compatible three-phase dust extractor automatically when a connected tool starts, with an adjustable run-on timer after the tool stops.Planned features: Automatic tool detection, adjustable run-on timer, status display and manual testing. Final specifications and compatibility will be confirmed before launch.Not available to order yet. Register below to be notified when it launches. No obligation to purchase.Register Your Interest — Aersync P3
[fluentform id="5"] -
ToolSense – Wireless Automatic Dust Extractor Sensor
Price range: $120.00 through $131.00Important: Older Aersync P1 units (purchased before September 2026) need a firmware update for ToolSense compatibility. The update and testing are free; you pay postage to Aerguard and we cover return postage within Australia. Please contact us before ordering for an older P1.
ToolSense is a wireless tool-use sensor, not a stand-alone dust extractor controller. With Aersync P1, an external Aerswitch receiver is required. Aerswitch P3 has a built-in wireless receiver, so no additional Aerswitch receiver is needed.
- 10A or 15A models: Choose to suit the connected tool and power outlet. The 15A version requires a suitable 15A outlet.
- Automatic detection: When the connected tool runs, ToolSense sends a wireless trigger to the receiver connected to Aersync P1 or built into Aerswitch P3.
- Simple pairing: Connect the tool and power supply, enter pairing mode on your controller's receiver (external on Aersync P1, built-in on Aerswitch P3), then press Test on ToolSense.
- Wireless range: Up to approximately 30m in suitable conditions. Test reception before permanent positioning.
- Test button: Sends a signal to help test pairing and operation.
What you need: ToolSense and a compatible controller. Aersync P1 additionally needs an external Aerswitch receiver; Aerswitch P3 does not. The woodworking tools and extractors shown in setup diagrams are not included.
2-year warranty and Australian-based support.
-
Out of stock
M12 8-Pin Cable – Connect Aersync P1 & Aerswitch P3
$28.00M12 8-Pin Male to Female Data Cable
-
Connects Aersync main enclosure to 3-phase controller
-
Enables slave mode operation for 3-phase dust extractor
-
Plug-and-play—no complex wiring
-
Refer to System Types for connection examples and setup guidance
-