There are 9 results in total
Sort by:Default sorting
  • Three-phase dust extractor controlled by Aerswitch P3, with a manual remote and single-phase ToolSense at a planer.
    Select options
    Select options

    Aerswitch P3 + ToolSense Three-Phase Automation Bundle

    Price range: $436.05 through $824.60

    Save 5% when bought together — bundle price applied automatically, no coupon needed.

    One Aerswitch P3 three-phase extractor controller, selected remote and 1–4 single-phase ToolSense sensors. Choose the ToolSense rating to suit your tools and outlets.

    Select options
  • AerLock control panel key connected to Aersync P1 controller with spare keyAersync P1 automatic vacuum switch and dust extractor controller with red StoP display, front view
    Select options
    Select options

    Aersync P1 + AerLock Shared Workshop Control Kit

    Price range: $251.75 through $270.75
    Automatic dust extraction with protected control settings for shared workshops. 🔹 10A or 15A Controller – Select the Aersync P1 rating to suit your workshop's connected load and outlet. 🔹 AerLock Key Included – Plug in the key to adjust the rotary knob and yellow buttons; remove it to restrict adjustments. 🔹 Automatic Tool Activation – Aersync P1 automatically starts the extractor when a directly connected tool runs. 🔹 Ideal for Shared Workshops – Useful in Men’s Sheds, training spaces and workshops with multiple operators. 🔹 2-Year Warranty & Local Support – Australian-based support and warranty against manufacturing defects. Controller and key only. AerLock is not an electrical safety isolation device.
    Select options
  • Two extractor three tool automation kit - components; Aerguard controller and included wireless controls on white background.Aersync P1 automatic vacuum switch and dust extractor controller with red StoP display, front view
    Select options
    Select options

    Two-Extractor, Three-Tool Automation Kit

    Price range: $633.65 through $731.50

    ToolSense compatibility: Aersync P1 controllers purchased before September 2026 need a firmware upgrade. Contact Aerguard before ordering if using an older P1.

    This kit includes a new, compatible Aersync P1. The firmware warning applies only to pre-existing older P1 controllers, not the new controller supplied in this kit.

    Automate two extractors across three tools, with electrical ratings tailored to your workshop.

    🔹 Two Aersync P1 Controllers – Select 10A or 15A independently for each extractor setup.

    🔹 Wireless Controls Included – Aerswitch Mini receiver + 4-button remote.

    🔹 One Wireless ToolSense – Choose 10A or 15A for the third workstation.

    🔹 Optional AerLock – Add an AerLock-equipped control panel and removable key to Controller 1 (+$26), Controller 2 (+$26), or both (+$52).

    🔹 Customise the Setup – The image shows an example; change each rating and select your AerLock option below; the price updates automatically.

    🔹 2-Year Warranty & Local Support – Australian-based support.

    Controls only: Tools, extractors, hoses, ducting and blast gates are not included.

    Select options
  • Two station remote kit - two button remotes; Aerguard controller and included wireless controls on white background.Aersync P1 automatic vacuum switch and dust extractor controller with red StoP display, front view
    Select options
    Select options

    Two-Station Remote Dust Extraction Kit

    Price range: $309.70 through $335.35
    Control one shared dust extractor from two workshop stations with your choice of simple or timer-equipped remotes. 🔹 Complete Wireless Controls – Includes your chosen 10A or 15A Aersync P1, Aerswitch Mini receiver + your chosen remote type, and a second matching remote (2 remotes total). 🔹 Choose Your Controller – Select 10A or 15A to suit your connected load and outlet. 🔹 Customise the Illustrated Setup – The image shows an example; change the controller and remote options below. 🔹 Choose 2-Button ON/OFF – Simple instant ON and OFF control from either workstation. 🔹 Or Choose 4-Button + Timers – ON/OFF plus 10-minute timed operation and 8-hour mode on both remotes. 🔹 Manual Remote Control – Operates the extractor remotely; does not automatically sense when a remote tool starts. 🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support. Controls only: Tools, dust extractor, hoses, ducting and blast gates are not included.
    Select options
  • Wireless dust extraction starter kit with Aersync P1, Aerswitch Mini and ToolSenseAersync P1 automatic vacuum switch and dust extractor controller with red StoP display, front view
    Select options
    Select options

    Wireless Dust Extraction Starter Kit – 1 to 4 Tools

    Price range: $406.60 through $809.40

    ToolSense compatibility: Aersync P1 controllers purchased before September 2026 need a firmware upgrade. Contact Aerguard before ordering if using an older P1.

    This kit includes a new, compatible Aersync P1. The firmware warning applies only to pre-existing older P1 controllers, not the new controller supplied in this kit.

    Start your tool and let your dust extractor start automatically—even from another workstation.

    🔹 Complete Wireless Controls – Includes Aersync P1, an Aerswitch Mini receiver, your chosen number of ToolSense sensors and one four-button remote.

    🔹 Customise the Illustrated Setup – The image shows an example; choose your controller rating, ToolSense rating and quantity below.

    🔹 Start with One Tool – Choose one ToolSense for a single wireless workstation, or add sensors for more tools.

    🔹 Automatic and Remote Control – ToolSense detects your tool starting; the included remote gives you manual ON/OFF and timer control.

    🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support.

    Controls only: Tools, dust extractors, hoses, ducting and blast gates are not included.

    Select options
  • Aersync P1 automatic vacuum switch and dust extractor controller with red StoP display, front viewAersync P1 automatic vacuum switch with red StoP display, side angle showing connections
    Select options
    Select options

    Aersync P1 Automatic Controller – Single Phase

    Price range: $239.00 through $291.00

    Aersync P1 by Aerguard is an automatic vacuum switch and dust extractor controller for single-phase woodworking tools. Start your tool and the extractor starts automatically. When the tool stops, the extractor runs for the time set on the dial, then switches off.

    Which Aersync P1 model?

    Add your tool and dust extractor wattages.
    10A: Up to approx. 2400W
    15A: Up to approx. 3600W. Requires a 15A outlet.
    Example: 1650W saw + 750W extractor = 2400W total. This is at the approximate 10A limit.
    Check the combined nameplate current and motor starting requirements; wattage alone is a guide.

    ✅ Flexible payment options available at checkout.

    🔹 10A or 15A Options – Choose the version that suits the combined load of your tool and dust extractor. The 10A model has a removable power lead; the 15A model has a fixed heavy-duty lead.

    🔹 Automatic Start and Stop – Start your tool and your dust extractor switches on. When your tool stops, the extractor keeps running for the time set on the rotary knob, then switches off.

    🔹 Simple Plug-In Setup – Plug your tool and dust extractor into Aersync, then connect Aersync to a suitable power outlet.

    🔹 Easy Timer Adjustment – Turn the rotary knob to choose how long the extractor runs after your tool stops—from 5 seconds to 8 hours.

    🔹 Easy-to-Read Display – Shows the operating status, time remaining before shut-off and any fault alerts.

    🔹 Quick Operation Check – Press the Test button on Aersync P1 to check that it turns on your extractor—no tool or remote needed.

    🔹 Optional 1-Second Start Delay – Press the delay button to have your extractor start 1 second after your tool, helping reduce circuit-breaker trips.

    🔹 Strong Metal Housing – A durable metal enclosure built for workshop use.

    🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support when you need help.

    Optional Accessories

    ToolSense — Detects when a compatible tool is running and sends a wireless signal to the Aerswitch receiver to activate Aersync P1.

    Aerswitch Mini Receiver Kit — Adds wireless remote control to Aersync P1.

    • 2-Button Remote: ON/OFF control.
    • 4-Button Remote: ON/OFF plus 10-minute and 8-hour modes.

    Designed and assembled in Australia.

    Select options
  • Aerswitch P3 three-phase dust extractor remote controller
    Select options
    Select options

    Aerswitch P3 Remote Controller – Three Phase

    Price range: $339.00 through $344.00

    Start and stop your three-phase dust extractor from your machine. Keep the remote at your saw, planer or workbench—no walk back to the extractor each time.

    $339 with the recommended two-button remote, or $344 with the four-button remote. Includes the controller and selected remote.

    • Built-in receiver—no Aerswitch Mini required.
    • Two-button remote: ON/OFF control.
    • Four-button remote: ON/OFF plus 10-minute and 8-hour timer modes.
    • Display and Test button for status and operation checks.
    • Designed and assembled in Australia, with local support and a two-year warranty covering manufacturing defects.

    Suits a 4-pin supply plug on your dust extractor as standard. A 5-pin option is available. Check your dust extractor’s supply plug before ordering. See connection options below.

    Select options
  • Aerswitch P1 single-phase remote dust extractor controller

    Out of stock

    Out of Stock
    Out of Stock

    Aerswitch P1 Remote Controller – Single Phase (Launch December 2026)

    COMING SOON — Aerswitch P1 Single-Phase Remote Controller
    Switch a compatible single-phase dust extractor ON or OFF from your workstation using a wireless remote.
    Remote control: This is a remote-operated controller, not an automatic tool-current detection system.
    Available remote functions: 2-button ON/OFF, or 4-button ON/OFF with 10-minute and 8-hour modes (subject to final release specifications).
    Not available to order yet. Register below for launch updates. No obligation to purchase.

    Register Your Interest — Aerswitch P1

    [fluentform id="6"]
    Out of Stock
  • Aersync P3 automatic three-phase dust extractor controller conceptThree-phase dust extraction setup diagram with controller and connected workshop equipment

    Out of stock

    Out of Stock
    Out of Stock

    Aersync P3 Automatic Controller – Three Phase (Coming Soon)

    Price range: $365.00 through $391.00
    COMING SOON — Aersync P3 Automatic Three-Phase Controller
    Designed to start a compatible three-phase dust extractor automatically when a connected tool starts, with an adjustable run-on timer after the tool stops.
    Planned features: Automatic tool detection, adjustable run-on timer, status display and manual testing. Final specifications and compatibility will be confirmed before launch.
    Not available to order yet. Register below to be notified when it launches. No obligation to purchase.

    Register Your Interest — Aersync P3

    [fluentform id="5"]
    Out of Stock