Your cart is currently empty!.
You may check out all the available products and buy some in the shop.
Continue ShoppingSingle Phase Dust Extractor Controllers
➤ Automatic Dust Extraction for a Single Workstation
Suited to small workshops where the tool is positioned near the dust extractor.
Aersync automatically starts your dust extractor when your tool starts. When the tool stops, the extractor keeps running for the time you’ve set to help clear remaining dust.
Set the run-on time using the rotary knob. The digital display shows the time remaining before the extractor switches off.
Aersync automatically starts your dust extractor when your tool starts. When the tool stops, the extractor keeps running for the time you’ve set to help clear remaining dust.
Set the run-on time using the rotary knob. The digital display shows the time remaining before the extractor switches off.
➤ Automatic Dust Extraction for Multiple Workstations
Automatically start your central dust extractor whenever a tool is used.
Plug each tool into a ToolSense sensor. When a tool starts, ToolSense sends a wireless signal to Aersync, automatically starting the connected dust extractor—no cables between workstations or remote buttons to press.
Pair up to 20 ToolSense sensors with one Aerswitch receiver. Setup is simple: put the receiver into learning mode and press the Test button on ToolSense.
Plug each tool into a ToolSense sensor. When a tool starts, ToolSense sends a wireless signal to Aersync, automatically starting the connected dust extractor—no cables between workstations or remote buttons to press.
Pair up to 20 ToolSense sensors with one Aerswitch receiver. Setup is simple: put the receiver into learning mode and press the Test button on ToolSense.
➤ Remote Controlled Dust Extraction for Multiple Workstations
Ideal for workshops with multiple machines sharing a central dust extractor, where simple remote ON/OFF control is all you need.
Start and stop your dust extractor from the machine you’re using—no need to walk across the workshop. Useful in large or spread-out workshops, helping you spend more time working and less time moving between equipment.
Pair up to 20 remotes with a single Aerswitch receiver, so you can keep a remote at each workstation and control the same extractor from multiple locations.
Start and stop your dust extractor from the machine you’re using—no need to walk across the workshop. Useful in large or spread-out workshops, helping you spend more time working and less time moving between equipment.
Pair up to 20 remotes with a single Aerswitch receiver, so you can keep a remote at each workstation and control the same extractor from multiple locations.